Shop
-
All Products
Armotech Core Air Tank 1,1
£194.99 Add to cartThe Dye Core air tank is a composite bottle with a stainless steel core.
Still it is light, small and Pi approved.
The Volume of this bottle is 1.1 liters (68ci) with 4500 psi (300 bar)
It comes without a regulator.
Technical details
• Weight: 0,8 kg
• Pressure: 300 bar
• Length: 197 mm
• Durchmesser: 111 mm
• Lifetime: 10 years (extendable twice for 5 years) -
HPA
Armotech Super Light Air Tank 0.25l 4500psi
£179.99 Add to cartThe Armotech tank is a composite tank with a stainless steel core.
The tank is Pi approved and has a volume of 0,25 liters with 4500 psi (300 bar).
Technical details
300 bar
0,25L
285g
Diameter 50 mm
Length 200 mm
Stainless Steel core
made by ARMOTECH
Air stock suitable -
HPA
Armotech Super Light Air Tank 0.5l 4500psi
£184.99 Add to cartLength: 200 mm
Diameter: 50 mm
Weight: 285g (bottle + regulator)
Volume: 30ci/0.5 litres
Filling pressure: 4500psi/300barDurable gel coat finish
DOT and TC compliant
5 year hydro test and 15 year life cylinder
850psi output pressure high flow regulator
Dual burst disks-HP and LP for maximum safety
Hardened aluminium, modular bonnet design
This tank does not come with a regulator and must be purchased separetely! -
HPA
Armotech Super Light Air Tank 0.8l 4500psi
£224.99 Add to cartThe Armotech Super Light air tank is a composite bottle with a stainless steel core. Still it is light, small and Pi approved.
Pressure:300 Bar / 4500psi
-
All Products
Blackleaf Airsoft Speed Board Polarstar JACK / F1 / F2 GEN2 (Safety / Select Fire)
£35.99 Add to cartBlackleaf Airsoft Speed Board Polarstar JACK / F1 / F2 GEN2 (Safety / Select Fire)
Trigger Board for Polarstar Jack / F1 / F2
Compatible with Standard and Gorilla FCU
Semi and Full Auto
With electronic Safety -
All Products
Blackleaf Airsoft Speed Board Wolverine Inferno / Reaper GEN2 (Safety / Select Fire)
£35.99 Add to cartSEMI / full auto
Suitable for Wolverine/Inferno premium/Reaper
0.25mm Trigger travel
Will not work for Spartan Boards or EM Units.
It will remain necessary to shorten the trigger stroke near the button during preparation to the ultra short travel course. It is also necessary to adapt the safety lever fitted between the trigger and the button to work correctly. -
Accessories
BottleCover Dye FlexTWST
£16.99Select optionsClearBlk/GreyBlk/BlueBlk/LimeBlk/OlvBlk/RedThe DYE Flex Series tank cover is the perfect mix of style and function coming with easy installation, no-slip grip, and more bottle coverage. Will fit 50, 68, 77, & 90 CI tanks.
-
Belts
Cubysoft Xpert Harness Belt
£114.00 – £149.00Select optionsS/M (75cm-100cm waist)L/XL (101cm-125cm waist)AR x5SMG x6ClearLow ProfileHigh Profile (Quick Mag Ramp)Both -
Dr.Black
Dr.Black 4.3 Fibre Rear Sights
£27.00Select optionsClearAquaBlackBlueGoldGreenGreyMagentaOrangePinkPurpleRedSilverTan -
All Products
DYE LT Throttle Regulator 4500PSI/300bar
£49.99 Add to cartFrom DYE we have their LT Throttle Bottle Regulator.
This is a 300 bar (4500 psi) Pi approved regulator for HPA tanks that are supplied without their Bottle Reg.
Known HPA Tanks supplied without a bottle regulator:
-
DYE Core Range Air Tanks.
[contact-form][contact-field label="Name" type="name" required="true" /][contact-field label="Email" type="email" required="true" /][contact-field label="Website" type="url" /][contact-field label="Message" type="textarea" /][/contact-form]
-
-
AirTac
EdGI 6.01 Brass Inner Barrel
£56.00Select optionsClear155mm185mmThe perfect barrel for a CRBN or HPA build – the EdGI Inner Barrels are the finest barrel in airsoft!
The best upgrade barrel out there for consistency and accuracy in both HPA and AEG builds.
This EdGI 6.01 Brass Inner Barrel Includes:EdGI 128mm 6.01 Brass Inner Barrel:
- 128mm, 155mm, and 185mm lengths
- 6.01mm Inner Diameter
- Brass Construction
- Hand Lapped by EdGI for a perfect finish
Compatible with:
- AirTac CRBN Upper
- Maxx Hopups
- Any AEG or HPA build
-
All Products
Elbow Pad Dye blk Perform XL
£49.99Select optionsClearSMLXLXXLDYE elbow pads are the result of years of player testimonials and extensive product research. Their lightweight airprene body and integrated cup-shaped EVA foam, pads are pre-shaped to conform to the natural bend of the joint, providing good comfort and flexibility. Each pad comes with a custom gel insert that is highly impact resistant and helps absorb the brute force created from intense slides and dives. Adjustable straps allow you to tighten the elbow pad and keep it in place at all times. Integrated slider gloves on each hand provide reinforced palm protection to keep you safe from turf-burns and gravel. The back of the slider glove features neoprene compression for added protection to the back of the hand. The placement of the slider glove also helps prevent the elbow pad from sliding up your arm and offers unrestricted movement during gameplay.
-
All Products
Fusion Engine™ Drop-In Kit – V2 – Gen 3 – M4
£549.99 Add to cartThe Original HPA Rebel
The Fusion Engine™ was released in 2011 and was the first new HPA system to hit the airsoft market in over two decades. This is the system that started the HPA revolution and has set the benchmark to which all other systems are measured. Although many have followed it, the Fusion Engine™ is considered by most to be the best. This system won “Best HPA Engine” the very first year Popular Airsoft added the HPA class to their Players’ Choice Awards.
This is a complete drop-in system which replaces the entire AEG gearbox with a full CNC machined lightweight aluminum chassis. It is the most adjustable system we produce with the widest range of adjustment in both velocity and rate of fire. Being a dual solenoid, closed bolt system so you are able to adjust the poppet valve (firing air) and nozzle (feeding) independently for full control over both the loading time and air volume used.
Being a true closed bolt system it is easier to achieve a high level of accuracy since it is not as critical of the hop-up configuration as an open bolt system. Additionally, it does have the best feeling trigger since the trigger micro-switch is custom fit to the frame so the trigger has a distinct break, hard stop and short reset
Gel Blaster Compatible
Fusion Engine HPA conversion kits can also be configured for use in gel blasters.
Please contact us for information on ordering Fusion Engine systems for gel blaster use.
Velocity: 550fps w/ .20g @ 120psi. Like other HPA systems, the velocity of the Fusion Engine™ can be fine tuned by adjusting the input pressure. However, there are also 6 nozzles available each with a different level of restriction which allows you to shift the velocity adjustment range up or down in large increments. This allows the Fusion Engine™ to have the widest velocity adjustment range of any of our systems. ROF: 30rps+ The maximum cyclic rate of the Fusion Engine™ is affected by several factors such as the operating pressure as well as the quality of the magazine and BB’s used. However, 30 rounds per second is achievable in most standard configurations. Air Efficiency: 400+ shots from 13/3000 @ 1.5J w/ .28g This system was primarily designed to deliver maximum power so air efficiency was not a critical part of its development. However, thanks to the modular design of its poppet valve, the system can be fine tuned using more restrictive valve stems and shims which allows air efficiency to more than double when operating at traditional field velocities.
