Shop
-
All Products
Lens i4 / i5 Dyetanium smk/blue ice
£43.99 Add to cartThe injected thermal lens for the DYE i4 goggles provides 100% UV-A, UV-B and UVC protection and is optically corrected for superior clarity. The lenses are also 4d-coated with permanent anti-fog and anti-scratch coating for performance and longevity. Selected lenses have a dyetanium™ coating to reduce glare and balance light transmission.
-
Accessories
Micro Gauge 4500psi HK Army Aerolite
£10.99 Add to cartMicro Gauge 4500psi HK Army Aerolite
Original Replacement Micro Gauge for HK Army Aerolite Regulators.
Compatible with:
– Aerolite
– Aerolite2 ProWichtig:
The background of the gauge can be black or blue depending of what is available. -
ESG Grips
MSG Anodized by GORILLA & MAC
£239.99 – £369.99Select options This product has multiple variants. The options may be chosen on the product pageClearBlackRedPurpleGreenSilverGoldBlueMSG + Reg -
All Products
Neck Protector Dye Perform blk
£16.99Select options This product has multiple variants. The options may be chosen on the product pageClearOneThe DYE performance neck protector is a progress in neck protection technology. We’ve specifically constructed the most critical areas utilizing a proprietary material. This new material is specifically engineered with intelligent molecules. They flow with you as you move, but on shock, lock together to absorb the impact energy. Soft while you’re wearing it, hard when you get hit. The inside material that is against your neck is made of one of the softest, most breathable materials. The neck protector offers comfort and protection for your neck. One size.
-
All Products
PerformTop Dye blk
£49.99Select options This product has multiple variants. The options may be chosen on the product pageClearS/ML/XLXXLWe have used a new compression formed padding for critical areas to offer greater protection without hindering performance or range of motion. Moisture wicking fabric is used to help maintain body temperature during aggressive play. Additional features include side vented gussets and upper chest mesh combined with Coolmax to give you the ultimate in climate comfort. COOLMAX® fabric absorbs and spreads moisture out across fabric to enhance evaporative drying rate.
-
Accessories
Polarstar – Fire Control Unit, Rev. 3 (Built in MCU)
£79.99 Add to cartThe REV3 FCU follows the classic design of our very first FCU and it is considered to be the finest fire control units on the market. Since it is equipped with an LCD screen and joystick you are able to easily scroll through menus and precisely adjust settings for the utmost control over the system. This FCU is also universally compatible with all PolarStar HPA systems including both dual and single-solenoid systems.
This latest REV3 model features updated voltage regulators which greatly improve energy efficiency as well as significantly reducing its overall size. Although it is large when compared the Mini FCU, the REV3 FCU is compact enough to fit into a M4’s buffer tube along with a small 300mAh Lipo pack.
Another great feature to this FCU is its integral Motor Control Unit (MCU) which allows it to run a box magazine through the MCU port.- LCD screen and Joystick for easy and precise adjustments.
- Compact 2.25″ x 0.9″ footprint.
- Integral Motor Control Unit (MCU).
- Compatible with both Dual and Single-Solenoid HPA systems.
-
All Products
Polarstar F2 – HPA Conversion Kit – M4
Original price was: £449.99.£429.99Current price is: £429.99. Add to cartWinner of the “Best HPA Engine” in the 9th Airsoft Players Choice Awards, the dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used. Additionally, this makes it possible to change the firing sequence giving it the ability to operate in both true closed bolt as well as “AEG” mode.
-
All Products
Polarstar Jack – HPA Conversion Kit – M4
Original price was: £349.99.£339.99Current price is: £339.99. Add to cartThe JACK™ was designed to answer the demand for an affordable, high performance HPA (High Pressure Air) conversion for AEG’s. The system is a drop-in cylinder replacement that is universally compatible with a wide range of gearbox versions that have center-line nozzles.
Similar to its sister products, the JACK™ replaces the original gearbox components with a programmable pneumatic system allowing for higher performance and greater reliability over a gear driven system. Although economically priced, the JACK™ still retains the same performance and quality you have come to expect from PolarStar products.
The JACK™ has only one moving part, the nozzle, which acts as its own poppet valve. Similar to the Fusion Engine™ and F2™ poppet, the nozzle is only piloted by the solenoid to open air flow through the poppet with none of the firing air coming from the solenoid itself. This design lets the JACK™ send a higher flow of air down the barrel than systems that only use a solenoid as the firing valve.
Gel Blaster Compatible
JACK HPA conversion kits can also be configured for use in gel blasters.
Please contact us for information on ordering JACK systems for gel blaster use.
Velocity: 500fps w/ .20g @ 130psi The JACK™ allows for easy velocity adjustment by changing input pressure and does not require different nozzles to reach its full velocity range. Using a standard M4 as an example, velocity can be adjusted from below 280fps and up to approximately 500fps with a .20g BB. Velocity can vary per model as longer barrels will increase the maximum velocity while shorter barrels will decrease it. ROF: 30rps The maximum cyclic rate of the JACK™ is affected by several factors such as the operating pressure as well as quality of the magazine and BB’s used. However, 30 rounds per second is achievable in most standard configurations. Air Efficiency: 1000+ shots from 13/3000 @ 1.5J w/ .28g Although not a critical requirement during development, JACK™ does boast some highly respectable figures in this category. This is made possible by its intelligently laid out design which minimizes dead volume resulting in better air flow, faster response and less air used per shot. -
All Products
Polarstar MR Regulator Gen 2
Original price was: £149.99.£139.99Current price is: £139.99. Add to cartWhen the original Micro Regulator™ came out it was an instant hit since it was ultra compact yet offered the performance of regulators twice its size. With the introduction of the second generation of this regulator, we’ve simplified manufacturing and ease of maintenance while retaining its compact footprint. With the regulator body coming it at just 0.006″ taller than the original, the Micro Reg™ GEN2 stands a hair over 2.25″ tall which makes the entire regulator more compact than a traditional UFA. Thanks to this streamline, low-profile design it allows tanks to fit more easily into compact packs popular with minimalist loadouts. This is all done without sacrificing performance as well since this tiny regulator has a lightning fast recharge rate that is on par with its larger brother the MRS™.
The Micro Reg™ GEN2 now shares the exact same internal components as the UGS™ and CGS™ and only has a total of two o-rings in its entire assembly which further promote reliability. Additionally, the GEN2 now has a two piece body similar to the large MRS™ making it much easier to maintain.
- Adjustable output pressure from 40psi to 130psi (standard configuration).
- Optional High Pressure Spring boots maximum pressure to ~200psi.
- Integral tournament lock can be secured with a standard zip-tie.
- Compatible with standard HPA as well as SLP tanks.
- HP Spring Not Included*
-
Accessories
Polarstar Wire Harness Rev. 2
£13.99Select options This product has multiple variants. The options may be chosen on the product pageClear7.513The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica’s body. These harnesses are universally compatible with all PolarStar electro-pneumatic HPA systems excluding the original V2 GEN1 Fusion Engine and Amoeba kits.
- Compatible with any PolarStar system that uses a REV2 or REV3 FCU.
- 18″ is standard length for V2 kits in F2, F1 and JACK. Also recommended for FE’s being installed into full stock replicas (e.g. M16A3).
- 13″ is standard length for V2 FE as well as V3 F2, F1 and JACK kits.
- 7.5″ is standard length for V3 and MG FE kits but is also recommended for wiring the FCU to the pistol grip with UGS/CGS installs.
